This is much like the handbook machine tool methodology of clamping a micrometer onto a reference beam and adjusting the Vernier dial to zero using that object because the reference. Motion is controlling multiple of} axes, normally at least of|no less than} two , and a tool spindle that moves in the Z . The position of the tool is driven by direct-drive stepper motors or servo motors to offer highly accurate actions, or in older designs, motors via a collection of step-down gears. Open-loop control works lengthy as|so long as} the forces are stored sufficiently small and speeds are not too great. On commercial metalworking machines, Cooling Towels closed-loop controls are normal and required to offer the accuracy, velocity, and repeatability demanded.
2 comments:
Post a Commentnice song
This is much like the handbook machine tool methodology of clamping a micrometer onto a reference beam and adjusting the Vernier dial to zero using that object because the reference. Motion is controlling multiple of} axes, normally at least of|no less than} two , and a tool spindle that moves in the Z . The position of the tool is driven by direct-drive stepper motors or servo motors to offer highly accurate actions, or in older designs, motors via a collection of step-down gears. Open-loop control works lengthy as|so long as} the forces are stored sufficiently small and speeds are not too great. On commercial metalworking machines, Cooling Towels closed-loop controls are normal and required to offer the accuracy, velocity, and repeatability demanded.